How to Configure FreeNAS 11.2 Windows Share

FreeNAS 11.2 Windows Share

How to Configure FreeNAS 11.2 Windows Share. Step by Step   In this article I will show how to configure FreeNAS 11.2 Windows Share with new FreeNAS GUI. FreeNAS in 11.2-RELEASE introduce web interface and new features. For configuration from… Continue Reading

Best Hard Drives for NAS of 2019

Best Hard Drives for NAS

Best Hard Drives for NAS of 2019 Traditional mechanical hard drives are still very widely used in NAS (Network Attached Storage). Although hard drives lose at the speed of modern SSD drives, but they absolutely win on the price. It… Continue Reading

How to mount FreeNAS NFS share on Ubuntu Linux with write permissions

FreeNAS

How to mount FreeNAS NFS share on Ubuntu Linux with write permissions This guide explains how to configure NFS share on FreeNAS. And mount FreeNAS NFS share on Ubuntu Linux with read and write permissions to avoid FreeNAS NFS permission… Continue Reading

How To Create FreeNAS Windows SMB Share. Step By Step

FreeNAS

How To Create FreeNAS Windows SMB Share. Step By Step. FreeNAS 11   In this article I will show how to configure Windows SMB share on FreeNAS. And how to access from windows to FreeNAS shared SMB folders. FreeNAS in… Continue Reading

LSI 9210-8i HBA Card Flash To IT Mode

LSI 9210-8i HBA Card Flash To IT Mode If you are using LSI SAS 2008 based HBA/RAID cards such as the LSI 9211-8i FreeNAS recommend run in IT (Initiator Target) mode. Don’t use cards in IR (Integrated RAID) mode. For… Continue Reading

Configure Cisco Switch for FreeNAS LACP link aggregation

freenas

  Configure Cisco Switch for FreeNAS LACP link aggregation Lets configure GigabitEthernet0/31 and GigabitEthernet0/31  switch (SW) for LACP link aggregation SW>enable SW#configure terminal Enter configuration commands, one per line.  End with CNTL/Z. SW(config)#interface range GigabitEthernet0/31 – 32 SW(config-if-range)#no shut SW(config-if-range)#channel-group… Continue Reading