Cisco SPA504G Time 1 Hour Behind
How to fix Cisco SPA504G Time In “Regional” tab Set: Ignore DHCP Time Offset: yes Daylight Saving Time Enable: yes Daylight Saving Time Rule: start=10/1/7/03:0:0;end=4/1/7/02:0:0;save=1
Cisco
Configure Cisco Switch for FreeNAS LACP link aggregation
Configure Cisco Switch for FreeNAS LACP link aggregation Lets configure GigabitEthernet0/31 and GigabitEthernet0/31 switch (SW) for LACP link aggregation SW>enable SW#configure terminal Enter configuration commands, one per line. End with CNTL/Z. SW(config)#interface range GigabitEthernet0/31 – 32 SW(config-if-range)#no shut SW(config-if-range)#channel-group… Continue Reading
Cisco switch initial configuration and setup IP
Here is initial configuration for Cisco switch, setup management IP and configure telnet switch>enable Password: switch# Enter to configuration mode: switch# conf t switch(config)# Configure IP address: switch(config)#interface vlan 1 (enter to VLAN 1 configuring interface mode) switch(config-if)#ip address 10.1.1.1… Continue Reading